SUITABLE FOR FOOD APPLICATIONS
The Hill model 1950 Polypropylene Lever Pump fitted with fluoropolymer rubber seals complying with FDA requirements for all food types has been tested for compliance with UK and European Regulations for Food Contact Applications. The product demonstrates conformity with food contact regulations EC Directive 90/128/EEC and amendments and UK Statutory Instrument 1376 (1998) relating to the use with fatty and aqueous foods.
This product complies with the requirements of (EC) 1935/2004
During the assembly and testing of this product a lubricating medium is used and some of this fluid remains within the pump.
This fluid is Slipstream DFC3 oil which is classified as safe with most food substances within the requirements of the UK Food Safety Act 1990
In instances where compatibility is in
doubt it is recommended that the product is flushed out using a suitable fluid.
Trace elements of the test fluid will remain in the pump even after flushing.
Self Priming, discharge 330mls per stroke 2"BSP fitting, hose attachment nozzle telescopic uptake pipe 400 to 915mm
Dip end of uptake pipe in flushing fluid and operate pump in normal manner. It will normally take three strokes for the fluid to emerge from the nozzle. Purge pump as required and withdraw uptake from the fluid.
Continue pumping action for three strokes to dispel fluid.
RAPRA Certificate No
This Product is not intended for
ERNEST H. HILL LIMITED
Telephone ; +44 (0) 114 248 4882
Fax ; +44 (0) 114 248 9142
web site ; http://www.hillpumps.com